Dragons are fairly easy to draw. This dragon doodle tutorial will show you how to doodle a dragon curled around a tower.

What you need:

Draw Your Dragon’s Base lines

Start by using your ruler to help you make two straight lines that are vertical on the paper. Draw the curve of the dragon by drawing a slithery shape over the castle, making sure the top part is sticking out off of the castle. Make two lines on top that are parallel on the castle with little boxes. Add the two triangles leading down to the lines to make it a smoother transition. Draw lightly so that any erasing done is completely gone from the page.

Draw the Castle for your Dragon Doodle

The window is a dome shape with very little blocks around it. You can also use circles instead of blocks. The base of the castle has rocks that help hold it steadily in place. Stained glass can be drawn in the window to make it look more magical. Erase about a half an inch around where the line where the dragon spine is on top of the castle, so the dragon has room to be fat and dragon-like. Remember the dragon is curling around the tower, so every other line should be behind the castle, or erased completely.

 Draw the Dragon

The dragon is fat and lazy and as long as you bring it a burger, you may pass. Really emphasize this point by making him look like a fat anaconda that don’t want none. His face should resemble that of an angry turtle with a forked tongue and a dental problem. Make sure the lines are even and when it curves around the castle tower, the line also curves as a snake would curl around a branch. Both front paws should be hanging onto the top of the tower and the other foot should just be dangling in the air. The back fin should just be like a cheap twisted up ribbon krazy glued onto the back of the beast.

Finish Your Dragon Doodle

You may color him in or leave him blank. If you would like to add scales, simply draw little dome shapes all over his body and fill them in with color. You could also add wings that curve around the castle in a hog, because he is fat and scared to fall off.

Cats are one of the easiest things to learn to draw. Lately, I have seen a lot of tutorials on drawings of cats based off of the letter “N.”  Here’s an easy drawing tutorial of kitty with a bit of corruption. 

What you need:

Draw the Cat’s Head and Body Lines

Start off by making a candy corn shaped head with rounded edges. This may take a few tries to perfect, do not be afraid to erase any mistakes along the way. From that, draw two lines going straight down. At the base of the line going down that the cat’s nose is facing away from, draw the curve of the tail. The tail should be an S shape.

Doodle the Cat’s Paws and Belly

The guideline closer to the cat’s face is also the back of its leg. Draw a leg coming out from the other side of the body with the paw hitting right at the base of the line. The paw is a sort of oval shape with a sharp edge touching the ground, representing a claw. Feel free to add detail to the foot, separating the claw from the paw and making toes. The belly is a curved line going to about where your back feet are, which is just a circle and oval connected with the toes hidden behind the front paw.

Draft the Cat’s Ears and Tail

Draw another line above the S shape attached to the rear end of your doodle cat. I just realized my cat’s paws look like front flippers of a seal, so you may need to ajust the angle of the feet. The ears are drawn on either side of the head and are shaped sort of like furry devil horns. They are on the curved edges of the upper part of the triangle. The ears slightly curve up, making the cat look more comical and curious.

Facial expression

For the face, draw a line going down the middle of its face and another curved line going across where the eyes will rest on. The eyes are oval shaped with a point in the corners where they would meet up with the muzzle. Make them quite large so your cat looks extra creepy. Draw a pupil shaped like a triangle inside each eye, slightly cross eyed. Add a little heart shaped nose and a mouth and you are done. You may color in the doodle kitty or leave him as is.

Have you ever wanted to wear a lollipop, but it was just too sticky? Then let this simple and easy tutorial guide you through how to make your own sugar free and totally wearable polymer clay lollipop.

What you will need

Step 1:Collecting your Different Colors

Start by rolling out small balls of each color, about a third inch round each. Separate the white and translucent first, as they will be stained by the other colors if you mold them with your hands while having other colors on them. Start with translucent, then sparkly white, light blue, silver, teal, red, and then finally bronze for the best effect.

Step 2:Making the Lollipop

After the balls of clay are rolled out and kneaded, roll them all individually on a flat surface to about 6 inches long. Twist them together gently and roll them all together, twisting it up as much as you would like as you roll it thinner, to about a foot in length. Then roll it up in a circle and tuck the end of the twist on the side so that it leaves a slight indent in the clay for the popsicle stick.

Step 3:Adding the Stick to the Polymer Clay Lollipop and Final Touches

Roll the plain white to about a third inch thickness and cut the end flat. Attach the stick to the base of the lollipop and sort of squish them together to make them fuse. Cut out a piece of wire that is slightly longer than the lollipop from the bottom of the stick all the way to the top of the lollipop. Twist the wire with a loop on the end and make sure it will fit. Use a skewer to poke a hole almost through and bake it at 275F for 15 minutes. After it comes out of the oven, superglue the metal piece into the lollipop securely and let it cure, then you are technically done. However, it will look much better if you leave the stick matte but drip clear nail polish or glaze on the candy part of the lollipop.